This controller enclosure measures 10 x 8 x 8" (250 x 200 x 200 mm). The box is made of powder coated, 0.040" (1 mm) thick steel. The door comes with lock and key. The hinge of the door is removable. It can be installed on either the right or left side. This allows the user to put the pre-cut opening either on top or at the bottom without changing the door opening directions. Gasket and plugs are provided. The enclosure is designed to be mounted on a wall or directly to your powder coating oven. You can directly mount it with screws or hang it on the wall with the hangers. For high power circuit, wall mount box is preferred because the heavy cords (10 AWG or thicker) are difficult to manage with a table top enclosure.
The front panel of enclosure has the following knockouts:
- (1) 45x45mm square holes: 1/16 DIN PID controller or power regulator.
- (7) 22mm round holes: for indicators, flashing buzzers, selector switches, power switches, lights, emergency shutoff.
The bottom of enclosure has the following knckouts:
- (1) Inner 15mm round hole: strain-relief power grip.
- (1) Outer 28mm round hole: strain-relief power grip.
- (1) 21mm round hole: 1/2 inch EMT Fitting.
The left of enclosure has the following knockouts:
- (2) 21mm round hole: 1/2 inch EMT Fitting.
The right of enclosure has the following knockouts:
- (2) 21mm round hole: 1/2 inch EMT Fitting.
- (1) 40x50mm rectagular hole: 2P Breaker Switch